Amplifier Provides 55 dB Linear Gain
Stealth Microwave’s SM4450-41L solid state GaAs FET amplifier exhibits linear gain of 55 dB with a typical P1dB of 41 dBm and typical OIP3 of 54 dBm in a frequency range from 4.4 to 5 GHz.
...continue
Capacitors Offer High Capacitance
Vishay Intertechnology’s, Inc. 140 CRH Series SMT aluminum capacitors provide capacitance values from 10 to 1,000 µF and ripple currents up to 900 mA at 100 kHz and 125°C.
...continue
Controller Supports WLAN
Connect One’s iChip CO2144 machine-to-machine (M2M) IP controller supports WLAN and cellular standards in applications including automotive, remote monitoring and medical devices.
...continue
DC/DC Converters Deliver 60 W
Murata Power Solutions’ UEI Series isolated DC/DC converters deliver from 50 to 60 W of power output in a temperature range from -40ºC to 85ºC in a 40.60 × 50.80 × 10.16-mm (1.60” × 2” × 0.40”) PCB-mounted package.
...continue
PLO Exhibits 100 KHz Accuracy
Raditek’s synthesized phase lock oscillator (PLO) generates RF output frequencies not harmonically related to the reference with accuracy of 100 KHz.
...continue
Regulator Yields Low Quiescent Current
Maxim Integrated Products’ MAX16999 voltage linear regulator consumes only 13 µA of quiescent current and 0.3 µA in shutdown while delivering up to 100 mA of output.
...continue
Test Capability Analyzes Category 6 Devices
Agilent Technologies’ 5.7-Mbps HSUPA test capability analyzes W-CDMA/HSPA test and lab applications, which runs on the 8960 Wireless Communications Test Set, in Category 6 HSUPA-capable mobile devices and chipsets.
...continue
Timing Platform Integrates PTP and SETS Device
Semtech’s ToPSync™ (Timing Over Packet Synchronization) ACS9510 device combines IEEE1588v2 Precision Time Protocol (PTP) with the SONET/SDH synchronous equipment timing source (SETS) solution.
...continue
VCO Exhibits Low Phase Noise
Z-Communications’ CLV1570B-LF L-band VCO offers a typical phase noise of -108 dBC/Hz at an offset of 10 KHz and a typical tuning sensitivity of 25 MHz/V.
...continue
